MT6575 Android Scatter.txt _HOT_
Download https://urluss.com/2tvtbK
How to Create and Use MT6575 Android Scatter.txt File
A scatter file is a text file that contains the information about how the firmware is structured and how it should be flashed on a Mediatek device. A scatter file can be used to backup or restore the entire ROM or specific partitions of a device. It can also be used to flash custom recoveries, root packages, or custom ROMs on a Mediatek device.
In this article, we will show you how to create and use a scatter file for MT6575 Android devices. MT6575 is a chipset model that powers many Android smartphones and tablets, such as Samsung Galaxy S3 clone, Lenovo A60+, and Micromax A110.
How to Create a Scatter File for MT6575 Android Devices
To create a scatter file for MT6575 Android devices, you will need the following tools:
A Windows PC
A USB cable
MTK Droid Tools (download from [^1^])
ADB drivers (download from [^2^])
A rooted MT6575 device with USB debugging enabled
Follow these steps to create a scatter file for your MT6575 device:
Install the ADB drivers on your PC.
Extract the MTK Droid Tools zip file and run the MTKdroidTools.exe file as administrator.
Connect your MT6575 device to your PC via USB cable. Wait for the MTK Droid Tools to detect your device and show its information.
Click on the \"Root, Backup, Recovery\" tab and then click on \"Backup\" to backup your device's firmware. This may take some time depending on the size of your firmware.
After the backup is completed, click on \"To prepare blocks for Flash Tool\" to create a scatter file. Choose a name and location for your scatter file and click \"OK\".
You will see a message saying \"Task is complete\" and your scatter file will be saved in the same folder as your backup.
How to Use a Scatter File for MT6575 Android Devices
To use a scatter file for MT6575 Android devices, you will need the following tools:
A Windows PC
A USB cable
SP Flash Tool (download from [^3^])
A scatter file for your MT6575 device (created in the previous section)
A firmware or custom ROM that is compatible with your MT6575 device
Follow these steps to use a scatter file for your MT6575 device:
Install the SP Flash Tool on your PC.
Extract the firmware or custom ROM zip file and locate the scatter file inside it. If there is no scatter file, you can use the one you created in the previous section.
Run the SP Flash Tool as administrator and click on \"Scatter-loading\" to load the scatter file.
The SP Flash Tool will show all the partitions of your device and their corresponding files. You can uncheck any partition that you don't want to flash or change its file path if needed.
Click on \"Download\" to start flashing your device. Make sure your device is switched off and connected to your PC via USB cable.
The SP Flash Tool will show a progress bar and a green circle when the flashing is done.
Disconnect your device from your PC and reboot it. Enjoy your new firmware or custom ROM! aa16f39245